Fabrication of Amorphous Silicon-Carbon Hybrid Films Using Single-Source Precursors.

The aim of this study was the preparation of different amorphous silicon-carbon hybrid thin-layer materials according to the liquid phase deposition (LPD) process using single-source precursors. In our study, 2-methyl-2-silyltrisilane (methylisotetrasilane; 2), 1,1,1-trimethyl-2,2-disilyltrisilane (trimethylsilylisotetrasilane; 3), 2-phenyl-2-silyltrisilane (phenylisotetrasilane; 4), and 1,1,2,2,4,4,5,5-octamethyl-3,3,6,6-tetrasilylcyclohexasilane (cyclohexasilane; 5) were utilized as precursor materials and compared with the parent compound 2,2-disilyltrisilane (neopentasilane; 1). Compounds 2-5 were successfully oligomerized at λ = 365 nm with catalytic amounts of the neopentasilane oligomer (NPO). These oligomeric mixtures (NPO and 6-9) were used for the preparation of thin-layer materials. Optimum solution and spin coating conditions were investigated, and amorphous silicon-carbon films were obtained. All thin-layer materials were characterized via UV/vis spectroscopy, light microscopy, spectroscopic ellipsometry, XPS, SEM, and SEM/EDX. Our results show that the carbon content and especially the bandgap can be easily tuned using these single-source precursors via LPD.

Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators.

Since surface-initiated photopolymerization techniques have gained increasing interest within the last decades, the coupling of photoinitiators to surfaces and particles has become an important research topic in material and surface sciences. In terms of surface modification and functionalization, covalently coupled photoinitiators and subsequent photopolymerizations are employed to provide a huge variety of surface properties, such as wettability, stimulus responsive features, antifouling behavior, protein binding, friction control, drug delivery, and many more. For this purpose, numerous type I and type II photoinitiators or other photosensitive moieties have been attached to different substrates so far. In our studies, a convenient and straightforward synthetic protocol to prepare a novel germanium-based photoinitiator (bromo-tris(2,4,6-trimethylbenzoyl)germane) in good yields was developed. The immobilization of this photoinitiator at the surface of silicon wafers and quartz plates was evidenced by X-ray photoelectron spectroscopy (XPS). Employing visible-light-triggered surface-initiated polymerization of different functional monomers, including acrylamide, perfluorodecyl acrylate, and fluorescein-o-acrylate, surfaces with various features such as hydrophilic/hydrophobic and fluorescent properties were prepared. This was also achieved in a spatially resolved manner. The polymer layers were characterized by contact angle measurements, UV-vis/fluorescence spectroscopy, spectroscopic ellipsometry, and XPS. The thicknesses of the surface grafted polymer layers ranged between 10 and 126 nm.

Anti-Adhesive Organosilane Coating Comprising Visibility on Demand.

There is a wide application field for anti-adhesive and hydrophobic coatings, stretching from self-cleaning surfaces over anti-graffiti and release coatings to demolding aids in the production of polymers. The typical materials for the latter are hard coatings, including TiN, CrN, diamond-like carbon, etc. Alternatively, organosilane coatings based on perfluorinated compounds or molecules with long alkyl side chains can be employed. Although these functional layers are generally required to be invisible, there is a demand for a straightforward approach, which enables the temporary control of successful and homogeneous application as well as abrasion and wear of the coatings during use. For this purpose, a visibility-on-demand property was introduced to an already established anti-adhesive organosilane coating by incorporation of 1,8-naphthalimide-N-propyltriethoxysilane (NIPTES) as a fluorescent marker molecule. While the naphthalimide unit provides blue fluorescence under UV irradiation, the ethoxy groups of NIPTES enable the covalent coupling to the coating as a result of the hydrolysis and condensation reactions. As a consequence, the fluorescent marker molecule NIPTES can simply be added to the coating solution as an additional organosilane component, without the need for changes in the approved deposition procedure. The generated fluorescent anti-adhesive coatings were characterized by contact angle measurements, atomic force microscopy (AFM), as well as by different spectroscopic techniques, including FTIR, UV-Vis, fluorescence and X-ray photoelectron spectroscopy (XPS). In addition, the on-demand control function provided by the introduced fluorescence properties was evaluated along an injection molding process.

A new method for successful indirect bonding in relation to bond strength.

The aim of the work was to develop a new transfer method for indirect bonding of brackets to improve the bond strength by applying a uniform contact pressure over the entire dental arch. This has a great potential to reduce the bracket loss rate during clinical treatment. A suitable shape memory polymer (SMP) was selected and prepared in the chemistry laboratory. This SMP applies a force to the brackets during bonding and thus increases the bond strength by applying uniform contact pressure. Various transfer trays were equipped with SMP platelets and the transfer of brackets from the plaster model to the real human tooth model was performed in vitro. The transfer accuracy and bond strength of the bonded brackets were investigated by 3D-overlay and shear tests, respectively. The transfer accuracy was technique sensitive and showed higher accuracy for the trays with SMPs and self-curing silicones than for the vacuum formed trays with SMPs. The bond strength of the indirectly bonded brackets with SMPs was on average 1-2 MPa higher than the bond strength of the brackets indirectly bonded with a conventional two-layer vacuum formed tray without SMPs. Thus, transfer trays with SMPs can provide a significant improvement in bond strength during indirect bonding after appropriate adjustment.

Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions.

Straightforward and versatile surface modification, functionalization and coating have become a significant topic in material sciences. While physical modification suffers from severe drawbacks, such as insufficient stability, chemical induced grafting processes efficiently modify organic and inorganic materials and surfaces due to covalent linkage. These processes include the "grafting from" method, where polymer chains are directly grown from the surface in terms of a surface-initiated polymerization and the "grafting to" method where a preformed (macro)-molecule is introduced to a preliminary treated surface via a coupling reaction. Both methods require an initiating species that is immobilized at the surface and can be triggered either by heat or light, whereas light induced processes have recently received increasing interest. Therefore, a major challenge is the ongoing search for suitable anchor moieties that provide covalent linkage to the surface and include initiators for surface-initiated polymerization and coupling reactions, respectively. This review containing 205 references provides an overview on photoinitiators which are covalently coupled to different surfaces, and are utilized for subsequent photopolymerizations and photocoupling reactions. An emphasis is placed on the coupling strategies for different surfaces, including oxides, metals, and cellulosic materials, with a focus on surface coupled free radical photoinitiators (type I and type II). Furthermore, the concept of surface initiation mediated by photoiniferters (PIMP) is reviewed. Regarding controlled radical polymerization from surfaces, a large section of the paper reviews surface-tethered co-initiators, ATRP initiators, and RAFT agents. In combination with photoinitiators or photoredox catalysts, these compounds are employed for surface initiated photopolymerizations. Moreover, examples for coupled photoacids and photoacid generators are presented. Another large section of the article reviews photocoupling and photoclick techniques. Here, the focus is set on light sensitive groups, such as organic azides, tetrazoles and diazirines, which have proven useful in biochemistry, composite technology and many other fields.